— 15 —
REPLACING THE COMPACTFLASH CARD
The CASSIOPEIA comes equipped with a card slot that supports CompactFlash cards.
Important
• If the card stops part way into the slot, do not try to force it. Doing so can damage the card or the
CASSIOPEIA. Remove the card, make sure it is oriented correctly, and then try inserting it again.
• Be sure to save any unsaved input or edited data before replacing the CompactFlash card.
To replace the CompactFlash card
1. Make sure that CASSIOPEIA power is turned off.
2. While pressing down on the card cover 1, slide the cover from the CASSIOPEIA 2.
3. Press the card eject button to partially eject the card, and then pull the card out of the slot.
4. Insert a new CompactFlash card into the slot.
• Double-check to make sure that the card is oriented correctly before you insert it into the slot.
• Push the card into the slot as far as it will go.
Important
• Take care to orient the card correctly. The top of the card should be facing in the same direction as the
top of the CASSIOPEIA. The card will stop part way into the slot if it is not oriented correctly.
5. Replace the card cover.
Important
• In order to protect data stored in memory, the CASSIOPEIA automatically turns off whenever you re-
move the card cover. Also, power will not turn on while the cover is removed.
1
2
Back of card
To Next Page
Loading...
Need help?
General