EasyManuals Logo

Casio CDP-S160 User Manual

Casio CDP-S160
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Digital Piano Operation
EN-14
You can store the notes you play in Digital Piano memory for
later playback.
Memory Capacity
You can record approximately 2,500 notes in Digital Piano
memory.
•The 4 RECORD button lamp will flash at high speed
when memory runs low.
Recording stops automatically if the number of notes in
memory exceeds the maximum.
Recorded Data
Keyboard play
Keyboard tone (including layered tone)
Pedal operations
Reverb and chorus settings
Tempo setting
Transpose setting
Duet Mode setting (Off, On, Pan), duet keyboard registers
Digital Piano settings cannot be changed while recording is
in progress.
Recording Data Storage
Starting a new recording deletes any data that was
previously recorded in memory.
If power to the Digital Piano is cut off while recording is in
progress, everything you recorded up to that point will be
deleted. Take care so power is not turned off accidentally
during recording operations.
CASIO COMPUTER CO., LTD. takes no responsibility
for any damages, lost profits, or claims by third parties
arising from the deletion of recorded data due to
malfunction, repair, or for any other reason.
To record keyboard play
1.
Long-press 4 RECORD until the button’s
LED starts to flash.
The flashing 4 RECORD button LED indicates that
the Digital Piano is in record standby.
To exit record standby, long-press 4 RECORD
again until the LED goes out.
2.
To start recording, play something on the
keyboard, press the pedal, or press 4 a.
During recording, the LED stops flashing and remains
lit.
3.
To finish recording, press 4 a.
The LED will turn off after the recording save operation is
complete (which may take a little time).
To play back a recorded performance
1.
Press 4 a.
This starts playback of what you recorded.
During playback of a recorded song the 4 RECORD
button LED flashes at the tempo of the recording.
2.
To stop playback, press 4 a again.
Playback will stop automatically when the end of the
recording is reached.
Recording and Play Back
Flashing

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio CDP-S160 and is the answer not in the manual?

Casio CDP-S160 Specifications

General IconGeneral
Keyboard88 keys, Scaled Hammer Action Keyboard II
Touch Response3 sensitivity levels, Off
Polyphony64 notes
Tones10 built-in tones
EffectsReverb (4 types), Chorus (4 types)
MetronomeYes
Demo Songs2
Pedals1 (sustain pedal included)
Amplifiers8W + 8W
Power Consumption8W
Weight10.5 kg
Power SupplyDC 12V
ConnectivityUSB Type-B, headphone jack, pedal jack
Transpose-12 to +12 semitones
TuningA4 = 415.5 Hz to 465.9 Hz
Battery6 AA batteries (approximately 13 hours of continuous operation)
Included AccessoriesMusic stand, AC adaptor
Dimensions132.2 (W) x 23.2 (D) x 9.9 (H) cm (52 1/16 x 9 1/8 x 3 7/8 inch)

Related product manuals