Casio CE-250 - Loading 2-Ply Receipt Paper

11
Getting Started
66
66
6
Separate the two sheets of
the paper.
77
77
7
Join the ends of the paper
again and insert them into
the paper inlet.
00
00
0
Replace the printer cover, passing the leading end of the
outer sheet through the cutter slot. Tear off the excess
paper.
99
99
9
Insert the leading end of the inner sheet (which will be
your journal) into the take-up reel, as described
starting from
step
88
88
8 under "To load 1-ply paper for printing of
journal."
88
88
8
Press the f key until
about 20 cm to 30 cm of
paper is fed from the
printer.
To load 2-ply paper for printing of receipts
Follow steps
11
11
1 through
55
55
5 under "To load 1-ply paper for printing of receipts" above.
8. Install receipt/journal paper. (continued…)