Casio Celviano 6ES1A - Adding Reverb to the Tone; Adding the Chorus Effect to the Tone

E-12
Using Built-in Tones
1. Press the

(REVERB) button to toggle
reverb on and off.
Selecting the Reverb Type
You can select from among the following four types of
reverb.
1: Room
2: Hall
3: Large Hall
4: Stadium
1. Hold down the

(REVERB) button until the
reverb type selection screen shown below
appears on the display.
2. Use the

(w, q) buttons to select the
reverb type you want.
3. Press the

(REVERB) button to exit the
reverb type screen.
1. Press the

(CHORUS) button to toggle
chorus (which adds depth to a tone) on and
off.
Selecting the Chorus Type
You can select from among the following four chorus
types.
1: LightChorus
2: Chorus
3: Deep Chorus
4: Flanger
1. Hold down the

(CHORUS) button until the
chorus type selection screen shown below
appears on the display.
2. Use the

(w, q) buttons to select the
chorus type you want.
3. Press the

(CHORUS) button to exit the
chorus type screen.
Adding Reverb to the Tone
Lit when on
Adding the Chorus Effect to
the Tone
Lit when on