Assembling the Stand
E-43
1.
Raise the music stand and insert its support
bar into the two grooves behind it.
CAUTION
• Take care to make sure that the support bar engages
securely into one of the two grooves. If you raise the
music stand too hastily, the support bar may not engage
correctly and make the music stand unsteady.
2.
You can adjust the angle of the music stand
as shown in the illustration below.
1.
Insert the headphones hook
J
into the two
holes on the bottom of the piano.
2.
Use screw
K
to secure the headphones hook
in place.
To raise the music stand To install the headphones
hook
J
K
AP500_03_e.fm 43 ページ ２００６年１０月３０日 月曜日 午後３時６分
To Next Page
Loading...
