Casio CT-S200 Manual

Part II
Channel Message
4 Receive Channel
The channel number of the channel message received by each part is shown in the table under “1.2.2
Instrument Part Block”.
5 Send Channel
Basically, the MIDI channel of the channel message sent when the Instrument is played coincides with
the MIDI channel of the part being played. Note, however, that the MIDI channel of the performance
information that corresponds to the keyboard main part depends on the MIDI Out Channel setting
value.
6 Note Off
Message Format: 8nH kkH vvH
9nH kkH 00H(receive only)
n: MIDI Channel Number
kk: Key Number
vv: Velocity(Send:40H, Receive:Ignored)
Transmit Sent when the keyboard is played. The key number changes in accordance with on the MIDI
Out Octave Shift function. The velocity changes in accordance with on the MIDI Out Velocity function.
Receive Receipt stops a note being sounded by a note on message.
7 Note On
Message Format: 9nH kkH vvH
n: MIDI Channel Number
kk: Key Number
vv: Velocity
Transmit Sent when the keyboard is played. The key number changes in accordance with on the MIDI
Out Octave Shift function. The velocity changes in accordance with on the MIDI Out Velocity function.
Receive Receipt sounds a note of the corresponding instrument part.
8 Control Change
6

Casio CT-S200 Specifications

General

Keyboard	61 keys
Polyphony	48 notes
Tones	400 built-in tones
Rhythms	77 built-in rhythms
Speakers	2 x 2.5W
Dance Music Mode	Yes
Lesson Function	Yes
Touch Response	No
Song Bank	60 built-in songs
Metronome	Yes
Transpose	Yes
Connectivity	Audio In (3.5mm Stereo Mini Jack), USB to host
Power Supply	AC adapter or 6 AA batteries
Weight	3.3 kg (without batteries)
Dimensions	93.0 x 25.6 x 7.3 cm
App Connectivity	Chordana Play for Piano
Effects	Reverb
Tuning	A4 = 415.5 to 465.9 Hz
MIDI	Yes
Audio Input	3.5mm stereo mini jack
Audio Output	3.5mm stereo mini jack
Amplifiers	2.5W + 2.5W