Using a Memory Card
E-101
• A memory card can become quite warm after very long use 
in the card slot. This is normal and does not indicate 
malfunction.
• A memory card must be positioned correctly when 
being loaded into the Digital Keyboard. Trying to force 
an improperly oriented memory card into the slot can 
damage the memory card and the slot.
1.
With the top of the memory card facing 
upwards (so you can see it), carefully insert it 
into the Digital Keyboard’s SD card slot (T-1) 
until stops with a click.
2.
To remove the memory card first press it into 
the slot further.
• This will cause the memory card to disengage and eject 
partially. Pull the memory card the rest of the way out of 
the slot.
Enter the card mode when you want to perform memory card 
operations.
• While in the rhythm mode (page E-7) press the C-7 (CARD) 
button to enter the card mode.
This will cause the : indicator to disappear from the 
display and the ; indicator to appear.
If the message “No Card” appears on the display, it means 
there is no memory card in the card slot. For details about 
what appears on the display while a card is loaded, see 
“Playing a Music File from a Memory Card” (page E-106).
• To exit the card mode, press the C-7 (CARD) button again.
This will cause the ; indicator to disappear from the 
display and the : indicator to appear.
• Format a memory card before using it for the first time.
• Before formatting a memory card, make sure it does 
not have any valuable data stored on it.
• The memory card format operation performed by this 
Digital Keyboard is a “quick format”. If you want to 
completely delete all of the data on the memory card, 
format it on your computer or some other device.
1.
Insert the memory card you want to format into 
the Digital Keyboard’s card slot.
• Make sure the memory card is write-enabled. Check 
the position of the card’s write-protect switch to ensure 
it is not in the write-protect position.
2.
Press the C-7 (CARD) button to enter the card 
mode.
3.
While holding down the R-13 (FUNCTION) 
button, press the C-13 (MENU) button.
• This displays the function menu “Play/CardUtl” screen.
Loading and Removing a Memory 
Card
Top
Entering the Card Mode
Formatting a Memory Card