Connecting to a Computer
E-110
You can transfer song sequencer songs, user rhythms, and
other data in Digital Keyboard memory to a computer for
storage. You also can load Auto Accompaniment data you
download from the CASIO website to the Digital Keyboard,
which greatly expands the Auto Accompaniment patterns
available to you. A special Data Manager application is
required in order to transfer data to and from the Digital
Keyboard.
The same types of data that you can store to or recall from a
memory card (page E-100) can be transferred to and from the
Digital Keyboard.
1.
Go to the CASIO WORLDWIDE site at the
following URL.
http://world.casio.com/
2.
At the site, select a geographic area or country.
3.
After accessing the area site, navigate to the
minimum computer system requirements for
Data Manager for this product.
• You should be able to find a link to Data Manager
information on the product introduction page of this
product. If you cannot find such a link, use the search
form of the area site where you are located to enter the
model name of this product and search for it.
• Note that site contents are subject to change without
notice.
4.
Check if your computer system complies with
the minimum requirements for Data Manager.
5.
Download Data Manager and its user’s guide to
your computer.
6.
Follow the procedure in the user’s guide that
you downloaded in step 5 to install and use
Data Manager.
You can use the procedures in this section to import and use
rhythm data from another model.
• You may experience some abnormalities when trying to
play back rhythm data created for another model.
• Note that some of the models described below are
available only in certain geographic locations.
Storing and Loading Digital
Keyboard Memory Data
Data Types Supported for Data Transfer
Downloading Data Manager
To download Data Manager
Using Rhythm (Auto
Accompaniment) Data from
another Model
Rhythm Data Compatibility
1
Models whose rhythm data is compatible with the
Digital Keyboard
Rhythm data (filename extension: ac7) of the models
below can be imported to the Digital Keyboard and used
as-is.
Conversely, rhythm data from this Digital Keyboard can be
used on these models.
AP-6/620
AT-3/5
CDP-200R/220R
CTK-4000/4200/5000/5000SK/5300/6000/6200/6300/
7000/7200/7300
PX-330
WK-200/210/220/225/330/500/6500/6600/7500/7600
2
Models whose rhythm data can be used as-is on the
Digital Keyboard
Rhythm data (filename extensions: z00 and ckf) of the
models below can be imported to the Digital Keyboard and
used as-is. Rhythm data for these models can be
downloaded from the CASIO MUSIC SITE
(http://music.casio.com/
).
CTK-671/691/900
PX-410R/575R
WK-3000/3200/3300/3500/3700/3800/8000
Rhythm data from this Digital Keyboard cannot be used on
these models.
3
Models whose rhythm data can be used on the Digital
Keyboard following conversion
Rhythm data (filename extensions: cpt and ept) can be
imported to the Digital Keyboard and used after it is
converted with Rhythm Converter to compatible data
(described in
2
above). Rhythm Converter can be
downloaded from the CASIO MUSIC SITE
(http://music.casio.com/
).
CTK-731/738/811
WK-1800
Rhythm data from this Digital Keyboard cannot be used on
these models.
To Next Page
Loading...
