Music Presets
E-51
While the music preset screen is displayed, you can use the
L-17 (ACCOMP ON/OFF) button to change Auto
Accompaniment settings.
• Each press of the L-17 (ACCOMP ON/OFF) button cycles
through settings as shown below.
• When a preset chord progression or accompaniment off is
selected, the keyboard can be used for melody play. When
accompaniment on is selected, the left side range of the
keyboard is the chord keyboard, and the right side range is
the melody keyboard.
While the music preset screen is displayed, buttons L-3 ([A]
POPS/ROCK/DANCE) to L-8 ([F] USER RHYTHMS) function
as music preset group select buttons. Because of this, you
need to perform the procedure below to change the rhythm.
1.
Press the R-17 (y) button twice.
• This displays a rhythm selection screen like the one
shown below.
2.
Use the buttons from L-3 ([A] POPS/ROCK/
DANCE) to L-8 ([F] USER RHYTHMS) to select a
rhythm group.
3.
Use the dial or R-14 (–, +) buttons to scroll
through the rhythm numbers until the one you
want is displayed.
4.
After selecting the rhythm you want, press the
R-15 (EXIT) button or press the R-17 (t) button
twice.
• This exits the rhythm selection screen.
• Pressing a button from R-1 ([A] PIANO) through R-12 ([L]
USER TONES) while a music preset is in use will display
the tone selection screen. While the tone selection screen
is displayed, pressing the R-17 (y) button once will
change to the rhythm selection screen shown in the
procedure above.
To change music preset Auto
Accompaniment settings
Setting
Preset chord progression Flashing
Normal Auto Accompaniment
(Accompaniment Off)
Not displayed
Normal Auto Accompaniment
(Accompaniment On)
Displayed
D indicator
To change the rhythm while using a music
preset
To Next Page
Loading...
