General Guide
E-8
Your Digital Keyboard is equipped with a song sequencer and
other features that you can use to store data you create. This
stored data is retained even when the Digital Keyboard is
turned off.
*
However, the tone, rhythm, and other settings you configure
on the Digital Keyboard’s console normally are returned to
their initial power on defaults whenever you turn off power.
You can configure the Digital Keyboard so it remembers its
latest setup or to apply a predetermined default setup each
time you turn it on. For details, see “AutoResume (Auto
Resume)” (page E-134) and “Default (Default Settings)” (page
E-134).
* The following data and settings are always retained even
when power is turned off.
– Registration setup data (page E-66)
– Song sequencer data (page E-68)
– User rhythm data (page E-103)
– User preset data (page E-58)
– User tone data (page E-44)
– User drawbar organ tone data (page E-50)
– Scale fine tuning setting (page E-22)
– LCD Contrast setting (page E-133)
– Auto Resume setting (page E-134)
You can delete all data in keyboard memory and return all
keyboard parameters to their initial factory default settings.
For details, see “To initialize all data and settings (or
parameter settings only)” (page E-135).
Saving Settings
Returning the Digital Keyboard to
Its Factory Default Settings
CTK7000_e.book 8 ページ ２０１０年７月２１日 水曜日 午後５時１５分
To Next Page
Loading...
Need help?
General
