86
Recording Movies
• During Time Lapse recording, the monitor screen will turn off in accordance with
the “Sleep” setting (page 191). Change the “Sleep” setting to “Off” if you want the
monitor screen to stay on. Note, however, that this setting will use up battery power
more quickly.
• If sleep is enabled (page 191), the monitor screen will turn off after the preset sleep
period if no camera operation is performed, but the time lapse recording operation
will continue. The camera’s back lamp will flash at this time. Performing any
operation while the monitor screen is blank will turn it back on. However, the
following operations will not turn the monitor screen back on.
– Pressing [ON/OFF] (Power)
– Pressing the shutter button all the way
– Rotating the mode dial
• The Auto Power Off is disabled while time lapse recording is in progress (page
191).
• The following functions cannot be used with this function.
Single SR Zoom, Anti-shake Functions, Lighting, Continuous AF, Triple Self-timer,
Motion Shutter, Face Detection, Metering, ISO, ISO High Limit, Make-up
• The frame rate of playback of movies shot with this function is 20 fps. Movie quality
depends on the scene you are using.
Scene 2 to 7: FHD
Scene 8 to 12: HD
• Note that audio is not recorded when recording with this function.
• When shooting in combination with the functions below, maximum zoom is 2X and
the focus mode is infinity.
Clouds, Sundown
• The camera can be configured to play only Time Lapse movies during a slideshow
(page 138).
• When using “» HDR Art” for movie recording, the intensity of the art effect is fixed
in accordance with movie settings.
• You cannot shoot a snapshot by pressing the shutter button while time lapse
recording is in progress (Snapshot In Movie).
• To adjust brightness when shooting with the Time Lapse “» Night Scene”, use
“
” (Shutter Speed) on the Control Panel (page 43) to adjust the shutter speed.
To Next Page
Loading...
Need help?
General
