103
Dynamic Photo
You can write text on a blank sheet of paper, shoot an image of it, and then extract
the text for insertion into an image.
1. On the BEST SHOT scene menu, select the “Dynamic Photo” scene
(page 57).
2. Press [SET], use [8] and [2] to select the third Control Panel option
from the bottom (Select Subject Type), and then press [SET] (page 32).
3. Use [8] and [2] to select “Number of Shots”, and then press [SET].
4. Use [8] and [2] to select “Text” and then press [SET].
5. Press the shutter button to shoot what is written on the paper.
IMPORTANT!
• When shooting text, take care to make sure that only the paper it is written on
completely fills the screen. Do not allow the edges of the paper to be included in
the text image.
Extracting Text from an Image
To Next Page
Loading...
Need help?
General
Weight and Dimensions
