67
Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Continuous AF
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is
performed and focusing is continually updated until you half-press the shutter button.
• Before you half-press the shutter button, the camera focuses at the center of the
screen. If “Face Detection” is turned on when you half-press the shutter button,
focusing is performed in the area where a face is detected.
• Shooting with Continuous AF can cause vibration and noise to occur due to lens
operation. This does not indicate malfunction.
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
Your digital camera is equipped with a CCD shift type camera shake correction
feature and a high-sensitivity anti image blur feature. These two features work in
concert to minimize the effects of hand and subject movement.
REC Mode Settings (REC)
Shooting with Continuous Auto Focus (Continuous AF)
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Auto Minimizes the effects of hand and subject movement.
Camera AS Minimizes the effects of camera movement only.
Image AS Minimizes the effects of subject movement only.
DEMO
Half-pressing the shutter button demonstrates the effect of
“A Camera AS”. However, the image is not recorded.
Off Turns off Anti Shake settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
