13
Creating a Dynamic Photo Image
A Dynamic Photo with a still image background and a moving subject is stored as a
series of 20 still images. You can use the following procedure to convert the
20 images that make up a Dynamic Photo to a movie.
1. Press [p] to enter the PLAY mode.
2. Use [4] and [6] to display the Dynamic Photo
you want to convert.
3. Press [SET], use [8] and [2] to select the
bottom PLAY Panel item (MENU), and then press
[SET].
4. Perform the following operation on the camera
PLAY tab * “Movie Converter”.
5. Press [SET] to convert the displayed Dynamic Photo.
• The final movie format is Motion JPEG.
• The final movie image size is 640
x
480 pixels.
6. Save the converted Dynamic Photo to your computer.
• Following conversion, the movie will be played back three times.
Step 4: Converting a Dynamic Photo Still Image to a Movie
(Movie Converter).
Complete!
To Next Page
Loading...
