74
Other Playback Functions (PLAY)
The Silent mode turns off camera operation sounds so you can avoid disturbing
others around you when play back images.
1. In the PLAY mode, press [SET].
2. Use [8] and [2] to select the “Silent Mode” PLAY Panel option and
then press [SET] (page 71).
3. Use [8] and [2] to select “On” and then press [SET].
This enters the Silent mode, which is indicated by m (Silent Mode) on the
monitor screen.
• The settings shown below are fixed and cannot be changed while in the Silent
mode.
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU *
“PLAY” Tab * Rotation
1. Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2. When the displayed image is at the orientation you want, press
[ ] (Delete).
NOTE
• Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the image menu
screen.
Performing Playback without Disturbing Others (Silent Mode)
Setting Description
Flash Off
Self-timer Off
AF Assist Light Off
Sounds Off
Rotating an Image (Rotation)
To Next Page
Loading...
