40
BASIC IMAGE RECORDING
Self-timer lamp
5.
Record the image.
• The self-timer lamp
flashes and the shutter
releases about 10
seconds after you press
the shutter release
button.
• You can interrupt an ongoing self-timer countdown by
pressing the shutter release button while the self-timer
lamp is flashing.
• The self-timer turns off automatically after the shutter
releases.
Specifying Image Size and Quality
You can specify the image size and image quality to suit the
type of image you are recording.
To specify the image size
1.
In the REC mode, press MENU.
2.
Rock the controller left or right to select the
“REC” tab.
3.
Rock the controller up or down to select “Size”,
and then rock the controller to the right.
4.
Rock the controller up or down to select the
setting you want, and then click.
1600 x 1200 : 1600 x 1200 pixels
1280 x 960 : 1280 x 960 pixels
640 x 480 : 640 x 480 pixels
NOTE
• Use 1600 x 1200 when you plan to produce a large
print of the image. Use 640 x 480 when you need to
economize on space because you plan to send im-
ages in e-mail, etc.
To Next Page
Loading...
Need help?
General
