Casio Exilim EX-S3 - To Delete a Best Shot User Setup

57
OTHER RECORDING FUNCTIONS
IMPORTANT!
• Setups that you register as Best Shot sample scenes
are located after the built-in sample scenes.
• When a Best Shot user setup is recalled, the monitor
screen in step 4 of the procedure on page 55
displays the text “Recall Favorites”.
• Note that formatting the built-in memory (page 106)
deletes all Best Shot user setups.
NOTES
• Best Shot user setups are located in the camera’s
built-in memory after the built-in sample scenes.
• The following are the settings that are included in a
Best Shot user setup: EV shift value, white balance
mode, flash mode, and ISO sensitivity.
• Note that images recorded with this camera only can
be used to create a Best Shot user setup.
• You can have up to 999 Best Shot user setups in the
camera’s built-in memory at one time.
• You can check the current setup of a scene by
displaying the various setting menus.
• User setups are assigned file names using the format
“UEXS3nnn.jpe” (where n = 0 to 9).
■ To delete a Best Shot user setup
1. In the REC mode, press [MENU].
2. Select the “REC” tab, select “REC Mode”, and
then press [왘].
3. Use [왖] and [왔] to select “ (Best Shot)”,
and then press [SET].
• This enters the Best Shot mode and displays a
sample scene.
4. Use [왗] and [왘] to display the user setup you
want to delete.
5. Press [왔] ( ) to delete the user setup.
• You can also delete a user setup by using your
computer to delete its file in the “SCENE” folder in
the camera’s built-in memory (page 124).