GETTING READY
31
3.
Swing the battery cover closed, and then slide
it in the direction indicated by the arrow.
IMPORTANT!
• Use only the special NP-40 rechargeable lithium ion
battery to power this camera. Use of any other type
of battery is not supported.
The battery is not fully charged when you use the
camera for the first time after purchasing it. You need
to charge the battery before using the camera for the
first time (page 31).
To charge the battery
1.
Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• Note that the shape of the AC adaptor depends on
the area where you purchased the camera.
AC Adaptor
[DC IN 5.3V]
USB Cradle
AC power cord
To Next Page
Loading...
