BASIC IMAGE RECORDING
59
Select this setting:
On
Off
To do this:
Turn on digital zoom
Turn off digital zoom
■ To turn digital zoom on and off
1.
In a REC mode, press [MENU].
2.
Use [왗] and [왘] to select the “REC” tab.
3.
Use [왖] and [왔] to select “Digital Zoom”, and
then press [왘].
4.
Use [왖] and [왔] to select the setting you
want, and then press [SET].
• Only the optical zoom range is displayed in the zoom
level indicator when digital zoom is turned off.
[
왔
] ( )
Flash mode indicator
Using the Flash
Perform the following steps to select the flash mode you
want to use.
• The approximate effective range of the flash is shown
below.
Wide Angle: Approximately 0.4 to 2.6 meters
(1.3´ to 8.5´) (ISO Sensitivity: Auto)
Telephoto : Approximately 0.4 to 2.0 meters
(1.3´ to 6.6´) (ISO Sensitivity: Auto)
* Depends on zoom factor.
1.
In a REC mode, press [왔] ( ).
• Each press of [왔] ( ) cycles through the flash
mode settings described below on the monitor
screen.
B
To Next Page
Loading...
