85
OTHER RECORDING FUNCTIONS
5.
Use [] and [] to select “Save”, and then
press [SET].
• This registers the setup. Now you can use the
procedure on page 82 to select your user setup for
recording.
IMPORTANT!
• BEST SHOT user setups are located in the camera’s
built-in memory following the built-in sample scenes.
• Note that formatting built-in memory (page 147)
deletes all BEST SHOT user setups.
NOTE
• The following are the settings that are included in a
BEST SHOT user setup: focus mode, EV shift value,
white balance mode, flash mode, ISO sensitivity,
Flash Intensity, Flash Assist, Sharpness, Saturation,
and Contrast.
• Note that images recorded with this camera only can
be used to create a BEST SHOT user setup.
• You can have up to 999 BEST SHOT user setups in
the camera’s built-in memory at one time.
• You can check the current setup of a scene by
displaying the various setting menus.
• When you register a BEST SHOT user setup, it is
automatically assigned a file name using the format
shown below, and stored in the “SCENE” folder.
UEZ57nnn.JPE (n = 0 to 9)
To Next Page
Loading...
