E-11
COMP
•Press the number key (
1 or 2) that corresponds to
the setting you want to use.
1(Dot): Period decimal point, comma separator
2(Comma): Comma decimal point, period separator
k Initializing the Calculator
• Perform the following key operation when you want to
initialize the calculation mode and setup, and clear re-
play memory and variables.
A B 3(All) =
Basic Calculations
k Arithmetic Calculations
Use the F key to enter the COMP Mode when you
want to perform basic calculations.
COMP .............................................................
F 1
• Negative values inside of calculations must be enclosed
within parentheses. For details, see “Order of Operations.”
• It is not necessary to enclose a negative exponent within
parentheses.
sin 2.34 10
–5
→ S 2.34 e D 5
• Example 1: 3(510
–9
)
1.5
10
–8
3 - 5 e D 9 =
• Example 2: 5(97)
80
5 - R 9 + 7 T =
•You can skip all T operations before =.
k Fraction Operations
uFraction Calculations
•Values are displayed in decimal format automatically
whenever the total number of digits of a fractional value
(integer + numerator + denominator + separator marks)
exceeds 10.
To Next Page
Loading...
Need help?
General
