Casio fx-570ES PLUS - Creating a Numerical Table from a Function (TABLE)

(MATRIX) (MatA)
(MATRIX) (MatA) (x
3
)
Creating a Numerical Table from a
Function (TABLE)
TABLE generates a numerical table for x and f(x) using an input f(x)
function.
Perform the following steps to generate a numerical table.
1. Press
(TABLE) to enter the TABLE Mode.
2. Input a function in the format f(x), using the X variable.
• Be sure to input the X variable ( (X)) when generating a
numerical table. Any variable other than X is handled as a constant.
•
The following cannot be used in the function: Pol, Rec, ∫, d/dx, Σ.
3. In response to the prompts that appear, input the values you want to
use, pressing
after each one.
For this prompt: Input this:
Start? Input the lower limit of X (Default = 1).
End?
Input the upper limit of X (Default =
5).
Note: Make sure that the End value is
always greater than the Start value.
65