as the decimal mark, the separator for multiple results is a comma (,).
When comma is selected, the separator is a semicolon (;).
Calc Settings > Digit Separator
On; Off
◆
Specifies whether or not a separator character should be used in
calculation results.
System Settings > Contrast
See "Adjusting Display Contrast" (page 12).
System Settings > Auto Power Off
10 Min.
◆
; 60 Min.
Specify the amount of time until Auto Power Off is triggered.
System Settings > MultiLine Font
Normal Font
◆
; Small Font
Specifies the display font size when LineI/LineO or LineI/DecimalO is
selected for Input/Output. Up to four lines can be displayed while Normal
Font is selected, and up to six lines can be displayed with Small Font.
System Settings > QR Code
Specifies the version of the QR Code displayed when
(QR) is
pressed.
Version 3: Indicates QR Code Version 3.
Version 11
◆
: Indicates QR Code Version 11.
Reset > Settings & Data
See "To initialize calculator settings" (page 22).
Reset > Variable Memory
See "Clearing the Contents of All Memories" (page 35).
21
To Next Page
Loading...
