6. To display results using a different format, display the result screen and
then press .
• This returns to the Result Type menu, so you can repeat step 5 of this
procedure and change the result display format.
7. If you want to perform a simulation with different settings, press
while the Result Type menu is displayed.
• This clears the simulation result and returns to the parameter input
screen. Perform the procedure again from step 3.
8. To exit Coin Toss, press while the parameter input screen is
displayed.
• This returns to the Math Box menu.
Note
• On the Relative Freq screen, you can store the value in a Rel Fr column cell to a
variable. For example, performing the following operation in step 5, above, will store
the value in the first row of the "Rel Fr" column to variable A: – [A=] > [Store].
Coin Toss Result Screen
• List screen
(1) Each row shows a sequential toss number. For example, 1 is the first
toss, 2 is the second toss, and so on.
(2) A, B, and C indicate each of the coins being used. When two coins
or three coins are being used, the column on the right shows the
number of coins that came up heads.
•
Relative Freq screen
82
To Next Page
Loading...
Need help?
General
