Casio G-SHOCK MTG-B2000PH-2A - Configuring the Summer Time Setting; Time); Swapping the Home City Time and World Time; (Dual Time)

3. Rotate the crown to change the time zone.
The Dual Time hour and minute hands
indicate the current time in the selected
time zone.
30
Crown
Dual Time hour and minute
Dual Time 24-hour
4. Push the crown back in and then lock it.
Configuring the Summer
Time Setting (Dual Time)
The watch’s current time setting can be
changed to summer time when required.
[STD]: The watch always indicates standard
time.
[DST]: The watch always indicates summer
time.
Important!
●
When the time zone for your Dual Time
is a region where time calibration
signal reception is possible, you will be
able to select [AT] (auto) for the
daylight saving time setting. However,
in order to have the Dual Time switch
to daylight saving time, you need to
swap it with your Home City time and
then perform a time calibration signal
receive operation.
l
Swapping the Home City Time and
World Time (Dual Time)
●
For information about areas where
time calibration signals can be
received, see the information below.
l
City (Time Zone) List
1. Enter the Calendar Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out to the
first click.
The second hand will point to the currently
selected time zone.
●
The mode hand will point to the summer
time setting of the Dual Time.
3. Hold down (B) for at least one second.
Each time you hold down (B) for at least
one second, the summer time setting will
cycle to the next available option.
30
4. Push the crown back in and then lock it.
Note
●
While [UTC] is selected as the city, you
will not be able to change or check the
summer time setting.
Swapping the Home City
Time and World Time (Dual
Time)
In the Calendar Mode, you can swap your
Home City time with your Dual Time by holding
down (B) for at least three seconds.
30
30
Dual Time Home Time
Dual Time
Home Time
After swapping
Before swapping
●
If a swapping operation causes a change in
the day indicator setting, the mode hand will
rotate repeatedly.
l
Hand and Day Indicator Movement
Note
●
This function comes in handy when
you need to move to another time
zone. For details about how to use it,
go to the section below.
l
International Travel
Stopwatch
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
3
0
Measuring Elapsed Time
30
Minutes
Hours
Seconds
Hours (24-hour time)
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
Stop
Resume
Stop
Start
3. Press (A) to reset the elapsed time to all
zeros.
Watch Operation Guide 5636
15