122
SETTINGS & TOOLS
NOTES
By default, your handset’s Bluetooth
®
functionality is turned off.
From idle mode, you can toggle Bluetooth
®
power on or off
by pressing the Directional Key & right and pressing
Bluetooth on/off.
•
•
Add New Devices
“Pairing” is the process that allows the handset to locate, establish,
and register a 1-to-1 connection with the target device.
To pair the handset with a new Bluetooth
®
device:
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK].
2. Press Bluetooth.
3. Press Add New Devices.
NOTE
If the Bluetooth
®
power is switched off, the following message will
appear on the main display: Turn Bluetooth power on?
Press the Center Select Key [OK] to select Yes. BLUETOOTH
POWER ON will appear on the display.
4. The handset will prompt you with the following message on the
main display: PLACE DEVICE YOU ARE CONNECTING TO IN
DISCOVERABLE MODE. Press the Center Select Key [OK].
5. The device will appear in the ADD NEW DEVICE menu. Select
the device you wish to pair with, then press the Center Select Key
[PAIR].
6. The handset may prompt you for the passkey. Consult the
Bluetooth
®
accessory instructions for the appropriate passkey
(typically “0000”—4 zeroes). Enter the passkey, then press the
Center Select Key [OK].
To Next Page
Loading...
