Casio G'zOne Rock

130
SETTINGS & TOOLS
Call Sounds
To set ringtones for types of incoming calls:
Call Ringtone
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
 Sounds Settings,  Call Sounds,  Call Ringtone.
2. Select a ringtone, then press the Center Select Key [SET] to save
the sound. To play the ringtone, press the Left Soft Key [Play].
Call Vibrate
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
 Sounds Settings,  Call Sounds,  Call Vibrate.
2. Select On or Off, then press the Center Select Key [SET].
Caller ID Readout
1. From idle mode, press the Center Select Key [MENU], select Settings
& Tools, then press the Center Select Key [OK]. Press  Sounds
Settings,  Call Sounds,  Caller ID Readout.
2. Select one of the following settings, then press the Center Select
Key [SET].
Ring Only/Caller ID + Ring/Name Repeat
Alert Sounds
To select the alert type for a new message:
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
 Sounds Settings,  Alert Sounds.
2. Select TXT Message/Media Message/Voicemail/Emergency
Tone/Missed Call/PTT Alert, then press the Center Select Key
[OK].
I
I
I