— 21 —
24 KB-1 time-out error 70 An error occurred during test of KB-1.
25 KB-1 reception error 70 An error occurred while reading data of KB-1.
28 Scale data error 71 An error occurred while reading scale data.
29 Thermal printer board 36, 37 An error occurred in the thermal printer board.
error
30 Thermal printer paper 36, 37 No paper in the thermal printer.
out error
64 AUTOPGM or X/Z error - A different format data is received.
(100)
65 AUTOPGM or X/Z error - A different format of compressed data is selected.
(101)
66 AUTOPGM or X/Z error - A received compressed data is abnormal.
(102)
67 AUTOPGM or X/Z error - A received compressed data is abnormal.
(103)
68 AUTOPGM or X/Z error - Auto program code 90/93 is received from different model.
(104)
69 AUTOPGM or X/Z error - Auto program code 90 is received from bigger memory ECR.
(105)
6A AUTOPGM or X/Z error - Abort.
(106)
6B AUTOPGM or X/Z error - A disk error of PC side.
(107)
6C AUTOPGM or X/Z error - A communication sequence is abnormal.
(108)
77 RAM card error - A power failue happened during read or write operation.
(119)
78 RAM card error - The RAM card door opened during read or write operation.
(120)
79 RAM card error - RAM card is not installed.
(121)
7A RAM card error - A ROM card is installed.
(122)
7B RAM card error - A different RAM card is installed.
(123)
7C RAM card error - A write operation is performed in the RAM card which has
(124) already some data.
7D RAM card error - A read operation is performed in the empty RAM card.
(125)
7E RAM card error - Write protect switch is on in the RAM card.
(126)
7F RAM card error - The other error. (Abnormal condition)
(127)
Error Nature of error Function Details
Code code
NOTE: The number of shown in the () is the operation error code number after code E56- of system error.
To Next Page
Loading...
Need help?
General
