Casio LK-160 - Using a Sampled Sound in a Rhythm (Drum Assign

English
Controlling the Keyboard Sounds
E-15
You can use the following procedure to apply various settings
to the sampled tone assigned to tone number 401.
1. Use
bq
(10-key) to select a tone number from
405 to 414.
Tone numbers 405 to 414 actually represent effects
assigned to tone number 401. Selecting a tone will play
the sampled sound in a loop, along with the applicable
effect, as described below.
Use the following procedure to replace a percussive
instrument with a sampled sound you sampled with short
sampling and play auto accompaniment rhythms (page E-28)
with it.
1. Press
3
(FUNCTION) and
4
at the same time.
The display will return to the previous screen if you do not
perform the next step for some time.
2. Use the
bq
(10-key) [–] and [+] keys to select
the drum assign type you want.
3. Start rhythm play (page E-28).
The rhythm sounds in accordance with the drum assign
type you selected in step 2.
• Some rhythm part drum sounds cannot be replaced by
sampled sounds.
Applying Effects to a Sampled Sound
Tone
No.
Effect
Name
Description
405 Loop 1 Loops the sampled sound.
406 Loop 2
Loops the sample sound and raises the
pitch of the resonating sound when the
keyboard key is released.
407 Loop 3
Loops the sample sound and lowers
the pitch of the resonating sound when
the keyboard key is released.
408 Pitch 1
Changes the pitch from low to high, at
an increasing rate.
409 Pitch 2
Changes pitch from high to low, at a
decreasing rate.
410 Pitch 3
Changes pitch from high to low, at a
decreasing rate, and then raises the
pitch when the key is released.
411 Tremolo
Alternates volume between high and
low.
412 Funny 1
Adds vibrato and changes pitch by a
gradually increasing amount.
413 Funny 2
Alternates between high pitch and low
pitch.
414 Funny 3
Adds vibrato and changes pitch from
low to high.
Using a Sampled Sound in a
Rhythm (Drum Assign)
Off (oFF) Sampled sound does not sound.
Type 1 (dr1) Replaces the bass drum of the rhythm
pattern with tone number 402, and the
snare drum with tone number 403.
Type 2 (dr2) Replaces more of the percussive
instruments than Type 1 with tone numbers
402, 403, and 404.
DrmAs ign
Lights