90
E
User Maintenance and Options
Step 2
Press f to feed about 20
cm of paper.
Step 3
Cut the journal paper at the
point where nothing is
printed.
Step 4
Remove the journal take-
up reel from its holder.
Step 5
Remove the paper guide
from the take-up reel.
Step 6
Slide the printed journal
from the take-up reel.
Step 7
Open the platen arm.
Step 8
Remove the old paper roll
from the cash register.
Step 9
Load new paper.
Go to the step 3 described
on page 12 of this manual.
Step 1
Set the mode switch to the
REG position and remove
the printer cover.
To replace journal paper
X
REG
OFF
RF
PGM
Z
X2/Z2
To Next Page
Loading...
