E-9
Playing with Different Tones
Using the Built-in Metronome
You can use the metronome to sound a count that helps
keep you in proper time.
1
Press the METRONOME button.
• This starts the metronome.
2
While holding down the CONTROL
button, press the BEAT [
] or [ ] button
to specify how many beats there are per
measure.
• The first value of the beat can be set to a value
of 2 through 6. The bell (indicating the first beat
of a measure) does not sound while a value of 0
is specified. All beats are indicated by a click
sound. This setting lets you practice with a
steady beat, without worrying about how many
beats there are in each measure.
3
While holding down the CONTROL
button, use the TEMPO [
] and [ ]
buttons to change the tempo (speed) of the
metronome.
• You can also use keyboard keys to change the
tempo setting (see page E-11).
4
Press the METRONOME button again to
stop the metronome.
412A-E-011A
To Next Page
Loading...
