E-6
Playing with Different Tones
Selecting and Playing a Tone
The piano comes with eight built-in tones.
1
Press the POWER button.
2
Use the VOLUME knob to adjust the
volume level.
• Before playing, it is a good idea to set the
volume to a relatively low level.
3
Press the TONE button of the tone you want to select
.
4
Now try playing something on the keyboard
.
Using Tone Effects
Reverb: Makes your notes resonate
Chorus: Adds more breadth to your notes
1
Press the REVERB CHORUS button to cycle
through the effect settings as shown below.
• You can find out the current reverb/chorus
configuration by looking at the REVERB and
CHORUS indicator lamps.
412A-E-008A
On
Off
On
On
Both on
Both off
Reverb on
Chorus on
CONTROL
REVERB CHORUS METRONOME
TONE
SPLIT
TEMPO BEAT
Other Effect Settings
You can select from among four reverb effects and four
chorus effects by pressing the keyboard keys shown
below.
1
While holding down the CONTROL
button, press one of the keyboard keys
shown above.
POWER button
▲
C1
▲
C2
▲
C3
▲
C4
▲
C5
▲
C6
▲
C7
▲
C8
1
Reverb Effect Keys
2
Chorus Effect Keys
Room 2 Hall 2
Hall 1
Room 1
Chorus 2 Chorus 4
Chorus 3
Chorus 1
To Next Page
Loading...
Need help?
General
