E-16
Using Built-in Tones
Changing the Octave of a Duet Mode
Keyboard
You can use the following procedure to change the
octave of the left and right Duet Mode keyboards.
1.
While holding down the
cs
(FUNCTION)
button, press the
dq
(SPLIT) button.
This displays the Duet Mode on/off screen shown in
step 2 under “Configuring the Digital Piano for Duet
Play” (page E-15). If the Duet Mode is currently turned
off, press the
ct
(q) button to turn it on.
2.
Of the four C keys in the left keyboard, press
the one that you want to have located at
middle C.
• This will sound the note assigned to C4 and change
the octave of the left keyboard.
Example: To change the configuration so the leftmost C
key is middle C as shown below.
3.
You can use the same procedure as step 2 to
select one of the C keys in the right keyboard
to shift its octave as well.
4.
Press the
cs
(FUNCTION) button.
This exits the Duet Mode on/off screen and causes the
cs
(FUNCTION) button lamp to go out.
The left and right keyboards will be configured
according to your settings.
NOTE
• Turning off the Duet Mode will clear your octave
shift settings and return the keyboard to its initial
default settings.
C4 C5 C6 C7 C3 C4 C5 C6
1 octave higher than initial setting Unchanged
Leftmost C key (Pressed key)
To Next Page
Loading...
Need help?
General
