E-14
Playing with Different Tones
To adjust the metronome volume
NOTE
• You can perform the following procedure at any time,
regardless of whether or not the metronome is sounding.
1.
While holding down the TEMPO/SETTING
button, press the METRONOME VOLUME
keyboard key. Keep the TEMPO/SETTING
button depressed until you finish step 2 of this
procedure.
• This will cause the lamp above the TEMPO/
SETTING button to flash and the current metronome
volume setting to appear on the display.
2.
Use the + and – buttons to change the
metronome volume setting in the range of 0
to 42.
PX800_e.book 14 ページ ２００６年１０月１２日 木曜日 午後１２時５分
To Next Page
Loading...
Need help?
General
