E-17
Recording and Play Back
You can store the notes you play in digital piano
memory for later playback. You can have up to five
songs in memory at one time.
A track is a container of recorded data, and each song
consists of two tracks: Track 1 and Track 2. You can
record each track separately and then combine them so
they play back together as a single song.
Memory Capacity
• Digital piano memory can hold about 50,000 notes
total, for five songs. Each song can contain up to
about 10,000 notes.
• Recording stops automatically and the REC lamp
goes out if the number of notes in memory exceeds
the maximum.
Recorded Data
•Keyboard play
•Tone used
• Pedal operations
• Reverb and chorus settings
• Tempo setting
• Layer and split settings (Track 1 only)
Recording Data Storage
• Starting a new recording deletes any data that was
previously recorded in memory.
• Should power fail during recording, all of the data in
the track you are recording will be deleted.
• You can save memory data to external media, if you
want. See “Using an SD Memory Card” on page E-29
for more information.
IMPORTANT!
• CASIO COMPUTER CO., LTD. takes no responsibility
for any damages, lost profits, or claims by third parties
arising from the deletion of recorded data due to
malfunction, repair, or for any other reason.
• After you select a song, it can take a number of seconds
for the song data to be loaded. While the data is being
loaded, the song number will flash on the display, and the
keyboard keys and button operations will be disabled. If
you are playing something on the keyboard, the following
operation will cause output to stop.
Using the RECORDER Button
Each press of the RECORDER button cycles through
the recording options in the sequence shown below.
METRONOME
RECORDER
PART/TRACK
SONG PLAY/STOP
/
Songs and Tracks
Song
Record
Record
While playing
back. . .
Track 2
Track 1
Playback
Standby
Record
Standby
Normal
Lit Flashing Off
PX800_e.book 17 ページ ２００６年１０月１２日 木曜日 午後１２時５分
To Next Page
Loading...
Need help?
General
