Connecting to a Computer
EN-47
4.
Double-click “PIANO”.
• “PIANO” contains folders named “MUSICLIB” and
“RECORDER”.
• To transfer a user song to the Digital Piano from your
computer, open the “MUSICLIB” folder and put the
song into one of the numbered subfolders (61
through 70). Each subfolder corresponds to a Music
Library number: Subfolder 61 to Music Library 61,
and so on.
• For example, storing song data in sub-folder 61 will
cause it to be treated as Music Library song 61 data by
the Digital Piano.
• To store Recorder song (.CSR) data on a computer,
copy the .CSR file in the RECORDER folder to the
computer. To return saved song (.CSR) data to Digital
Piano memory, copy it to the RECORDER folder.
* Before starting a store or load operation, first check
the file name extension to ensure it matches the ones
shown in this column.
In the case of a song recorded with the Digital
Piano’s recorder function, change its file name to one
of the names and extensions shown in this column.
• The initial default configuration for Windows Vista,
Windows 7, Windows 8.1, and Windows 10 is to hide
file name extensions. Perform one of the following
operations on your computer to show file name
extensions.
• To show file name extensions under Windows Vista
or Windows 7
• To show file name extensions under Windows 8.1 or
Windows 10
■ To load a song into user song memory
(Music Library 61 to 70)
Data Type
Folder
Name
File Name and Extension
*
User songs MUSICLIB .MID: SMF format data
(format 0/1)
.CM2: CASIO original
format data
Recorder
memory data
RECORDER BIDREC01.CSR: CASIO
original format data
\RECORDER
\MUSICLIB
\70
\62
\61
\PIANO
.MID files or .CM2 files
.CSR file (only one song data)
Digital Piano memory
1. Open Folder Options by clicking the [Start] button,
clicking [Control Panel], clicking [Appearance and
Personalization], and then clicking [Folder Options].
2. Click the [View] tab. Under [Advanced settings]
clear the [Hide extensions for known file types]
check box.
3. Click [OK].
1. Open any folder.
2. Click the [View] menu and then select the [File name
extensions] check box in the [Show/hide] group.
1. Open the MUSICLIB folder.
2. Copy the song file (.MID or .CM2) to the number-
named subfolder (61 to 70) whose name matches the
number of the Music Library location to which you
want to load the song.
• If there are two files with the filename extensions
.MID and .CM2 in the MUSICLIB folder, only the
.MID data will be loaded into user song memory.
To Next Page
Loading...
Need help?
General
