39
Part V
Parameter List
How to Read the Tables
Number Base Notation
"Size" indicates the parameter value bit width as a decimal value.
The bit field position of "Block" as a decimal value.
Values used in the explanations under "Description" are all decimal values, unless specified otherwise.
Values other than those described above are all hexadecimal.
R/W Field
The R/W field indicates whether an IPR (Individual Parameter Request) read operation or IPS (Individual Parameter Send)
write operation is enabled.
19 System Parameters
These parameters make it possible for an external device to check the status of the Instrument and for an external device
to command some operation of the Instrument.
19.1 System Information Parameter
This parameter is a container for system information.
19.2 Data Management Parameter
This is a message command computer-based data management software.
Parameter ID R/W Block Size Array Min-Def-Max Description
Model
Version
Internal Timestamp
External Timestamp
0000
0001
0002
0003
R
R
R/W
R/W
000000
000000
000000
000000
7
7
7
7
01
01
10
10
00-00-7F
00-00-7F
00-20-7F
00-20-7F
0...reserved
1...PX-200
2...PX-800
3...AP-500
4...PX-120
5...PX-720
6...PX-320
Version Number
Ascii Character
Ascii Character
Parameter ID R/W Block Size Array Min-Def-Max Description
Seq Free Size 0021 R 000000 32 01
00000000-00000000-FFFFFFFF
Sequencer Song
Byte Size
Ml Free Size 0022 R 000000 32 01
00000000-00030000-FFFFFFFF
Music Library
Byte Size
Ml Max Size 0023 R 000000 32 01
00000000-00030000-FFFFFFFF
Music Library
Byte Size
Delete Seq 0024 W 000000 7 01 00-00-7F Sequencer Song
Number
Delete Ml 0025 W 000000 7 01 00-00-7F Music Library
Number
To Next Page
Loading...
