Casio QT-2100 - Page 54

— 52 —
BUZZ n092
END n092
[ PRINT ][ LCD ]
BUZZ n092
END n092
BBBBBBBBBBBBBBBB *88.88
BBBBBBBBBBBBBBBB *88.88
[ PRINT ][ LCD ]
BBBBBBBBBBBBBBBB *88.88
BBBBBBBBBBBBBBBB *88.88
[ REAR DISPLAY ]
CASIO QT2100
QA TEMP TEST MODE
[ 19 ] Buzzer test
This test will check the buzzer function.
Operation : n 0 9 2 SUBTOTAL
n : 0 = One time check
Not 0 = Continuous check (To stop the test, press "Esc" key )
[ 20 ] Running test
This test is rinning test for ECR.
Printer cable connects to COM6 before this test.
The following process is a cycle of one testing. This process repeats it 15 times a minute.
Display → Print 1 Iine → Display → Print 1 Iine → Open drawer 1 time
Operation : 9 3 SUBTOTAL
Note : To stop the test, press "Esc" key.