Casio QT-2100 - Page 56

— 54 —
[ 23 ] MCR test
The test checks the fixed data and read data comparison.
Operation : 9 6 SUBTOTAL
Note1 : To stop the test, press "Esc" key.
Note1 : MCRI = Trock1
MCR2 = Trock2
Note2 : In case of error, the read data is displayed.
[ 24 ] To exit the diagnostic mode
To escape the diagnostic mode, execute INITIALIZE (MAC) operation.
MCR 96
MCR1 OK
MCR2 OK
END 96
[ PRINT ][ LCD ]
(When the trock2 data is incorrect)(When the trock1 data is incorrect)
MCR 96
MCR1 OK
MCR2 OK
END 96
[ ERROR DISPLAY ]
MCR1 ERR *************************
******************************
MCR1 ERR *************************
******************************
Read data