— 12 —
(10) Insert the floppy disc containing adjustment data of the lens ass'y in your PC and read the data.
File (F) ➜ Open (O)
Select FDD
Select adjustment data file with extension code .ADJ.
* Adjustment data file name: 9999999.ADJ
* 9999999 is the 7-digit number written on the seal stuck on the side of the lens unit.
(11) Change the following data with the number you have written on step 5 (data before replacing the lens
unit).
Caution: Never change the other data.
Agc-6db
Strobe-pwm
(12) Add the sum of three numerals agc-6db:206, white-Rgain, and white-Bgain on the checksum.
(Example) agc_6db : 206
+
white_Rgain : 78
+
white_Bgain : 163
||
checksum : 447
Note: If erroneous nuber is input, color adjustment cannot be done.
(13) Transfer the data to the camera.
Click Trans button on ADJ window.
“send OK” will be shown.
To Next Page
Loading...
