ā 29 ā
DISASSEMBLY/ASSEMBLY
1. Put on the lens cap in order to protect scratches
on the lens.
2. Open the battery cover and remove one screw
(BT3 panhead 1.4x3.5 black).
3. Remove one screw (BT3 flathead 1.7x3.5 black)
from the bottom of the camera.
4. Slide the CN cover and remove one screw (BT3
flathead 1.7x3.5 black).
5-1. Remove two screws (BT3 flathead 1.7x4.0 black)
from the side of the camera.
First screw
5-2. Second screw