Casio SE-S3000 - Page 31

31
Program 3
Parameter Sheet
Department key/at-PLU key/PLU program (Batch feature programming)
Programming procedure
Refer to page 8 to enter the program mode.
Department/at-PLU key
PGM
Select
“System Setting”
D
@
63s 6 6
: ~ : 6 6s
Department
Flat-PLU
To another department/flat-PLU key
Program data
(14 digits)
PLU
PGM
Select
“System Setting”
63s6 + 6 : ~ : 6 a 6s
To a new (not sequential) PLU
Program data
(14 digits)
Different program to the next PLU
PLU No.
(Rec No. 4 digits)
Program data
Description Choice Program code
Age limitation (“00” means no limitation.)
Signicant
numbers (00~99)
::
D
14
D
13
Single item control:
Normal receipt = 0, Single item receipt = 3
Signicant number
:
D
12
Multiplication registration is enable.
(Only effective for scanning PLU linked to this department.)
No = 0
Yes = 2
:
D
11
Normal/Condiment/Preparation (Not for department)
Normal item = 0, Condiment = 1, Preparation = 2
Signicant number
:
D
10
Disable operation in RF/REG– mode. a
No = 0
Yes = 1
:
(a+b)
D
9
Disable operation in REG mode. b
No = 0
Yes = 4
Taxable status:
See the next page.
::
D
8
D
7
Enable 0 unit price. a
No = 0
Yes = 1
:
(a+b+c)
D
6
Enable negative price. b
No = 0
Yes = 2
Hash c
No = 0
Yes = 4
Always “0”
;
D
5
Low digit limitation (LDL) for manually entered unit price Signicant number
:
D
4
Open PLU (only for PLU)
No = 0
Yes = 4
:
D
3
Commission 1 a
No = 0
Yes = 1
:
(a+b+c)
D
2
Commission 2 b
No = 0
Yes = 2
Prepared tax status (Canadian tax) c
Yes = 0
No = 4
Compulsory number of condiment/preparation PLU input.
Signicant number
(0~8)
:
D
1