Casio SE-S3000 Dealer's Manual

6
Scanning PLU
Summary
You can easily register items with barcode label by using barcode scanner.
Without programming any PLU code, unit price nor linked department, you can register the items and
create the PLU programming data automatically by not found PLU registration.
You can input the PLU code by scanning the code or enter the PLU code and press ® manually.
The barcode system of this register is as follows:
Scanning PLU code
Input method
Sample barcode
Scanner PLU code manual input
EAN-13 (PLU type) √ 13 digits with check digit
EAN-8 (PLU type) √ 8 digits with check digit
UPC-A (PLU type) √ 10/11 digits without check digit
UPC-E (PLU type) √ 6 digits without check digit
Preparation
Just connect the handheld scanner (option) with the register.
1. Power off the register, and disconnect the AC plug from AC outlet.
2. Remove the connector cover.
3. Connect the scanner to the register and tighten two screws of the connector.
COM2(+5V) COM1(+5V)
Connect here
4. Replace the connector cover, reconnect the AC plug and power on the register.

Casio SE-S3000 Specifications

General

Clerk lock	Yes
Types of payment	Cash
Number of Price Look-Up codes (PLUs)	7000 PLUs
Supported paper width	58 mm
Display number of lines	10 lines
Display number of characters	26
Second display number of characters	20
RS-232 ports	2
Power source	AC
AC input voltage	100-240 V
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	450 mm
Width	400 mm
Height	220 mm
Weight	10000 g