Casio SE-S3000 User Manual

E-104
Advanced programmings and registrations
Using an SD card
You can store sales data or program data to an SD card or you can restore the data from SD card to
your cash register.
The following table explains what you can do with an SD card.
[Backup→SD] Stores sales data and program data of register to SD card.
[Restore←SD] Restores sales data and program data from SD card to register.
[Program→SD] Stores program data to SD card.
[Program←SD] Restores program data from SD card to register.
[Backup→Flash] Stores program data into the register’s built-in ash memory (for a case of power failure with
at batteries).
[SD Format] Formats an SD for the rst usage.
The following sections explain the operation examples of the features using an SD card.
To format an SD card
When you use a new SD card, you must format the SD card rst.
All the data stored in the SD card will be cleared if you execute formatting.
Step Display
1 Insert an SD card into the SD card slot.
2 Turn the Mode switch to PGM position and select [SDcard
Setting].
3 Press F key.
Select [SD Format] on the SD card setting screen.

Casio SE-S3000 Specifications

General

Clerk lock	Yes
Types of payment	Cash
Number of Price Look-Up codes (PLUs)	7000 PLUs
Supported paper width	58 mm
Display number of lines	10 lines
Display number of characters	26
Second display number of characters	20
RS-232 ports	2
Power source	AC
AC input voltage	100-240 V
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	450 mm
Width	400 mm
Height	220 mm
Weight	10000 g