E-12
To use the cash register’s basic function
To install journal paper
1 By the same procedure of setting receipt paper, set journal paper on
the journal printer.
2 Using j key, feed the paper about 20 cm.
3 Remove the paper guide of the take-up reel.
4 Slide the leading end of the paper into the groove on the spindle of the
take-up reel and wind it onto the reel two or three turns.
5 Replace the paper guide of the take-up reel.
6 Place the take-up reel into place behind the printer, above the roll
paper.
7 Press the j key to take up any slack in the paper.
8 Replace the printer cover.
To Next Page
Loading...
