Casio SE-S400 Service Manual

– 19 –
SE-S400/SE-S800/PCR-T500/PCR-T520/SE-C450
SE-S3000/SE-S900/PCR-T2300/PCR-T2400/SE-C3500
5. DIAGNOSTIC PROGRAM
5-1. Launching The Diagnostic Program
(1) Set the paper.
(2) Perform initialization.

Plug the power cord to a power outlet with the Mode Switch OFF.

While pressing the keys below, turn the Mode Switch to [PGM].
One-printer model [FEED]
Two-printer model [JOURNAL FEED]

Initialization is complete when "INIT" appears on the Main Display.
INIT
0000000000
(3) Press
99990000s
.
(4) The diagnostic program starts and the version information of the diagnostic program is
automatically printed.
NOTE: Once the program starts, the status is displayed.
Boot Ver : xxxx xxxxxx
Apli Ver : xxxx xxxxxx
← Version
← Diag Version
5-2. Exiting the Diagnostic Program
(1) Turn the Mode Switch to [OFF].
(2) Perform initialization.
(3) Unplug the Power cord.

Casio SE-S400 Specifications

General

Clerk lock	Yes
Types of payment	Cash
Number of Price Look-Up codes (PLUs)	3000 PLUs
Supported paper width	58 mm
Display number of lines	10 lines
Display number of characters	26
Second display number of characters	20
RS-232 ports	2
Power source	AC
AC input voltage	100-240 V
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	450 mm
Width	400 mm
Height	220 mm