– 23 –
SE-S400/SE-S800/PCR-T500/PCR-T520/SE-C450
SE-S3000/SE-S900/PCR-T2300/PCR-T2400/SE-C3500
[2] Batch Test 1
[Function]
RAM, printer, time setting, buzzer and drawer tests are performed continuously.
[Operation]
Command :
1
k
Performs the following tests in sequence.
NOTE: Refer to each check item for details.
(1) RAM test
(2) Test print
(3) Time setting: Set the following data.
Arranged data: 2005 December 31,23:59’30
(4) Buzzer: Ring once the one shot buzzer. No print or display in this test.
(5) Drawer open
(6) Receipt issuance
[Printout of the Result]
Receipt Journal
BATCH 1
RAM WR OK
BBBBBBBBBBBBBBBBBBBBBBBB
DATE 05/12/31
TIME 23:59-30
DRW OK
END 1
BBBBBBBBBBBBBBBBBBBBBBBB
[3] Batch Test 2
[Function]
Main display test and Customer display test are performed continuously.
[Operation]
Command :
2
k
Performs the following tests in sequence.
Pressing any key changes the display.
NOTE: Refer to each check item for details.
(1) Main display test
(2) Main display back light test
(3) Customer display test
(4) Customer display back light test
[Printout of the Result]
BATCH 2
DISP OK
BACK LIGHT OK
DISP OK
BACK LIGHT OK
END 2
To Next Page
Loading...
