E-62
To assign a cashier
If cashier assignment system is programmed, you can obtain sales
data of each cashier on X or Z reports. Up to eight cashiers can
be assigned. When the mode switch is turned OFF, the assigned
cashier’s ID number will be cleared. See “To set general controls” on
page E-35 for programming cashier assignment system.
Step Operation
1 In any Mode switch other than PGM, CAL
or OFF, sign on by entering cashier’s ID
number then press :.
Z ~ <:
2 Perform regular operations.
3 When the cashier signs off, enter “0” then
press :.
?:
Mode Switch
Useful features
SES700_INC-e.indb 62 2013/09/02 11:28:04
To Next Page
Loading...
