– 1 –
Before using the Digital Diary for the first time...
Use the following procedure to load battereis and reset the unit before using it for the
first time.
1. Remove the screw that holds the main battery compartment cover in place and
open the cover.
RESET
2. Load two new batteries into the battery compartment.
• Make sure that the positive (+) and negative (–) ends are facing correctly.
RESET
3. Replace the battery compartment cover and secure it with its screw.
• Take care that you do not overtighten the screw.
4. Pull the insulating tape from the back-up battery by pulling in the direction
indicated by the arrow printed on the tape.
RESET
To Next Page
Loading...
