– 53 –
To delete all marked data items
1. While the index display of the To Do or Expense Manager Mode is on the screen,
press FUNC and then select “Delete marked records”.
• At this time the message “DELETE MARKED RECORDS (Y/N)?” appears.
2. Press Y to delete or N to abort.
■ Deleting All Data Items In Specific Modes
Use this procedure to delete all data items in selected modes.
To delete all data items in specific modes
1. From any screen, press SHIFT FUNC and then select “Delete all”.
2. Use K and L to move the pointer next to the mode whose setting you want to
change, and then use H and J to change the setting.
• The files in modes set to “Yes” will be deleted, while those set to “No” will not.
• If all modes are set to “Yes”, this procedure deletes all data in all modes.
3. After you are finished making the settings you want, press OK.
• At this time the message “Are you sure (Y/N)?” appears.
4. Press Y to delete or N to abort.
Marker (current setting)Pointer (selected file)
To Next Page
Loading...
Need help?
General
